SP RACING F3 FLIGHT CONTROLLER (ACRO)

SP RACING F3 FLIGHT CONTROLLER (ACRO)

36.00$

In stock

SKU: RE0074 Category:

Product Description

Features:
Practical – Easy to access connectors and solder pads.
Configurable – Choose to use connectors, solder pads or pins.
Stackable – Mount to your PDB or OSD.
Compact – Only 36x36mm.
Professional – Symmetrical, Neat and Tidy.
8 Dedicated PWM outputs
8 PWM Inputs
36 I/O Connections
72Mhz Clock Speed
3 Hardware Serial Ports
8Mb Flash Storage

Specifications (Acro Version):
The hardware was designed by the lead developer of Cleanflight to be more capable than the previous-generation STM32F1-based boards after hearing feedback from the Cleanflight users, contributors and top-pilots.

36x36mm board with 30.5mm mounting holes
Weight ~6 grams
Acro version is without Compass and Barometer Sensors
STM32F303 CPU, 72Mhz inc FPU
High-Capacity Flash (Acro and Deluxe)
MPU6050 accelerometer/gyro
MicroUSB socket
2x 8pin JST-SH sockets (PPM, PWM, SERIAL RX, GPIO, ADC, 3V, 5V, GND)
8x 3pin though-holes for pin headers for ESC/Servo connections
2x 4pin though-holes for pin headers for 2x serial ports
1x 2pin though-holes for pin headers for battery voltage
1x 2pin though-holes for pin headers for buzzer
1x 4pin JST-SH socket for I2C
1x 4pin JST-SH socket for SWD debugging

Specifications (Deluxe Version):
The hardware was designed by the lead developer of Cleanflight to be more capable than the previous-generation STM32F1-based boards after hearing feedback from the Cleanflight users, contributors and top-pilots.

36x36mm board with 30.5mm mounting holes
Weight ~6 grams
STM32F303 CPU, 72Mhz inc FPU
High-Capacity Flash (Acro and Deluxe)
MPU6050 accelerometer/gyro
MS5611 barometer (Deluxe only)
HMC5883 compass (Deluxe only)

MicroUSB socket
2x 8pin JST-SH sockets (PPM, PWM, SERIAL RX, GPIO, ADC, 3V, 5V, GND)
8x 3pin though-holes for pin headers for ESC/Servo connections
2x 4pin though-holes for pin headers for 2x serial ports
1x 2pin though-holes for pin headers for battery voltage
1x 2pin though-holes for pin headers for buzzer
1x 4pin JST-SH socket for I2C
1x 4pin JST-SH socket for SWD debugging

Flight Performance

The SPRacingF3 builds on tried and tested software, processor and sensor technology to make your aircraft fly like its on rails.

No-Compromise I/O

Use all the features all the time; e.g. Connect your OSD + SmartPort + SBus + GPS + LED Strip + Battery Monitoring + Sonar + 8 motors – all at the same time!

Configurable
The SPRacingF3 runs Cleanflight which can be configured to suit your needs using a cross-platform GUI (Windows/OSX/Linux).

Tiny and lightweight

The SPRacingF3 has a standard 36x36mm form-factor with 30.5mm mounting holes and weighs just 6 grams.

Flight Logging

On-board high-capacity black box flight log recorder – optimize your tuning and see the results of your setup without guesswork.

Next-Generation CPU

The SPRacingF3 has an ARM Cortex-M4 72Mhz CPU with Math co-processor (FPU) for efficient flight calculations that gets more done in less time.

Loop times up to ~2x as fast as previous-generation STM32F1 based boards.

Developer Friendly

Developer friendly debugging port (SWD) and boot mode selection, unbrickable bootloader.

OneShot ESC

Full support for OneShot ESCs for easy PID tuning and a sharper response.

Broad RC receiver Support

Supports SBus, SumH, SumD, Spektrum1024/2048, XBus, PPM, PWM receivers. No external inverters required (built-in).

Programmable LED

Dedicated output for programmable LEDs – great for orientation, racing and night flying.

Battery Monitoring

Battery monitoring ports for voltage and current.

Sonar

Sonar support for precision low-altitude hold.

I2C Port

I2C port always powered, perfect for external sensors or always-on OLED Screen.

Buzzer

Buzzer port for audible warnings and notifications.

Additional Information

Weight 0.09 kg

Reviews

There are no reviews yet.

Be the first to review “SP RACING F3 FLIGHT CONTROLLER (ACRO)”

Your email address will not be published. Required fields are marked *