MAVLink-OSD V2.0 On-Screen Display MinimOSD for Pixhawk/ APM


In stock


Product Description


MinimOSD, a minimal Arduino-based on-screen display board. It’s tailored for use with ArduPilot Mega and the MAVlink protocol, and designed to be as compact as possible.
It’s main components are an ATmega328P 8 bit microcontroller with an Arduino bootloader, and a MAX7456 monochrome on-screen display. Programming is done through an FT232 Module
It features two independent power and ground sections to isolate the OSD’s analog stage: a +5V section for the ATmega and the OSD’s digital stage, powered through the FTDI cable or other +5V source; and a regulated +5V section for the OSD’s analog stage, powered through the video in / out header and capable of handling up to +12V input. Solder jumpers are available to combine the two power and ground sections if desired.Main Features:
ATmega328P with Arduino bootloader
MAX7456 monochrome on-screen display
FTDI cable compatible pinout
Standard 6-pin ISP header
Two independent power sections with an LED indicator on each
Solder jumpers for combining the power sections
+5V 500mA regulator for up to +12V supply input
Solder jumper for PAL video option
Exposed test points for HSYNC and LOS


Dimension and Weight Package Weight: 0.04 kg
Package Size (L x W x H): 9.0 x 5.0 x 2.0 cm / 3.5 x 2.0 x 0.8 inches
Package Contents Package Contents: 1 x MAVLink-OSD APM Telemetry, 1 x Cable

Additional Information

Weight 0.05 kg