זמין במלאי
1
של
4
טוען...
ReadyEdi | מק"ט
RE-120ESC12S
RE ESC 12S 4in1 120A Conformal Coating - PCB Protection
RE ESC 12S 4in1 120A Conformal Coating - PCB Protection בהזמנה מוקדמת וישלח ברגע שיחזור למלאי.
מחיר רגיל
339.00 ₪
מחיר ליחידה
/
לא זמין
כולל מע״מ
עלות משלוח מחושבת במהלך התשלום.
לא ניתן לטעון את זמינות האיסוף
RE ESC 12S 4in1 120A Conformal Coating - PCB Protection
מחיר רגיל
339.00 ₪
מחיר ליחידה
/
לא זמין
FEATURES AT-A-GLANCE
Conformal coating is a protective, non-conductive polymer film applied to a printed circuit board (PCB) to shield it from environmental factors like moisture, dust, and chemicals, thereby extending the board's life and reliability. It is applied in a thin layer that "conforms" to the board's shape, protecting exposed traces, solder joints, and component leads from corrosion, abrasion, and other stresses.
| Parameter | Specification |
|---|---|
| Firmware | BLHeli_S / Bluejay |
| Battery Input | 3–12S LiPo |
| Continuous Current | 120A × 4 |
| Maximum Current | 125A × 4 for 10 seconds |
| Built-in TVS Surge Suppression Diode | Yes |
| External Capacitor | 1000µF high-frequency, low-ESR capacitor included |
| ESC / Motor Protocol | DShot300 / DShot600 / PWM / Bidirectional DShot |
| Input Voltage | 3–12S LiPo |
| Output Voltage | VBAT |
| Current Sensor | Supported, Scale = 400, Offset = 0 |
| ESC Telemetry | Not supported |
| Mounting Holes | 30.5 × 30.5 mm, 4 mm hole diameter |
| Dimensions | 45.4 × 42.8 × 6.5 mm |
| Weight | 23.5 g |
